#503 0°(Vertical) FLANGE MOUNT
9-7/8"Lx1-1/2"Hx1-1/8"D
(Body cut out 9-1/8"x1-1/8")
All Tough Lexan® (Polycarbonate) Construction
Flange Mount - Stnd: With Removable Back
3 #562 Bulbs
Black Body, 6’ Lead, 6’ Ground With DB Tape/Gasket
Can tilt from Vertical to 20° Down - Still passes FMVSS #108
Used on Caps, Shells, Motor homes and Hot Rods
Mounts easily with DB Tape/Gasket/Seal
Near Vertical, Flush Mounting in Fiberglass, etc. | | |
|
#516 15° FLANGE MOUNT
9 7/8"Lx1 1/2"Hx1 1/8"D
(Body cut out 9-1/8"x1-1/8")
All Tough Lexan® (Polycarbonate) Construction
Flange Mount - Stnd: With Removable Back 3 #562 Bulbs
Black Body, 6’ Lead, 6’ Ground With DB Tape/Gasket
Can tilt from Vertical to 20° Down - Still passes FMVSS #108
Used on Caps, Shells, Motor homes and Hot Rods
Mounts easily with DB Tape/Gasket/Seal
Near Vertical, Flush Mounting in Fiberglass, etc.
|
#530 30° FLANGE MOUNT
9-7/8"Lx1-5/8"H x1-3/4"D
(Body cut out 9-1/8"x1-1/8")
All Tough Lexan®
Polycarbonate) Construction
With Removable Back 3 #562 Bulbs
Black Body, 6’ Lead, 6’ Ground With DB Tape/Gasket/Seal
Primarily for Exterior use into surfaces 20º to 30º
Used on Caps, Shells, Motor homes and Hot Rods
Mounts easily with DB Tape/Gasket/Seal
|
#505 Vertical Bracket Mount 9"L x1"Hx 1"D
All Tough Lexan® (Polycarbonate) Construction
Bracket Mount - Stnd: 3 #562 Bulbs, Black Body
6’ Lead, 6’ Ground With #5 Crossbar Bracket
Can tilt from Vertical to 20° Down - Still passes FMVSS #108
Used on Caps, Shells, Motor homes and Hot Rods
|
#515 15° Bracket Mount 9"L x1"Hx 1"D
All Tough Lexan® (Polycarbonate) Construction
Bracket Mount - Stnd: 3 #562 Bulbs, Black Body
6’ Lead, 6’ Ground With #5 Crossbar Bracket
Can tilt from Vertical to 20° Down - Still passes FMVSS #108
Used on Caps, Shells, Motor homes and Hot Rods
|
