Home > 3RD BRAKE (CHMSL's) & AUGMENT FUNCTIONS > 400 Series High Mounted Stop Lights 6"x_x_
Sort By:
Page of 1
#430 30° FLANGE MOUNT
Our Price: $19.28
#403 0°(Vertical) FLANGE MOUNT
7¾"L x 2"H x 1½"D (Body cut out 6½ x 1½)
All Tough Lexan® (Polycarbonate) Construction
With 2 #922 Bulbs, Black Body
1-6’ Wire Leads, 1-6’ Wire Ground With DB Tape/Gasket/Seal
Can tilt from Vertical to 20° Down - Still passes FMVSS #108
Used on Caps, Shells, Motor homes and Hot Rods
Mounts easily with DB Tape/Gasket/Seal
2 Pre-Drilled holes for Screws or Pop Rivets
Near Vertical, Flush Mounting in Fiberglass, etc.
Requires 6½" x 1½" hole
403 0°(Vertical) FLANGE MOUNT
7-1/4"L x 2"H x 1½"D (Body cut out 6½ x 1½)
All Tough Lexan® (Polycarbonate) Construction
With 2 #922 Bulbs, Black Body
6’ Leads, 6’ Ground With DB Tape/Gasket/Seal
Can tilt from Vertical to 20° Down - Still passes FMVSS #108
Used on Caps, Shells, Motor homes and Hot Rods
Mounts easily with DB Tape/Gasket/Seal
2 Pre-Drilled holes for Screws or Pop Rivets
Near Vertical, Flush Mounting in Fiberglass, etc.
Requires 6½" x 1½" hole
#430 30° FLANGE MOUNT
Flange 7½”L x 2½”H x 2¾”D (Body cut out 6¾ x 2)
All Tough Lexan® (Polycarbonate) Construction
With 2 #922 Bulbs, Black Body
6’ Leads, 6’ Ground With DB Tape/Gasket/Seal
Used on Caps, Shells, Motor homes and Hot Rods
Mounts easily with DB Tape/Gasket/Seal
Flush Mounting in Fiberglass, etc.
#404 Roof Mount
Our Price: $19.28
#415 15° Bracket Mount
Our Price: $19.28
#404 ROOF MOUNT
Body 7½"Lx 2⅛"Hx 3⅛"D Fits all Full Size Vans and similar mounting contours applications
Mounts easily with DB Tape/Gasket/Seal
All Tough Lexan® (Polycarbonate) Construction
Uses #922 Bulbs
#405 Bracket Mount
Body 6½"L x 1½"H x 1⅜"D
Primarily used in CAP/SHELL Rear Window applications
All Tough Lexan® (Polycarbonate) Construction
Uses Cooler #922 Bulbs
Outside, can tilt from Vertical to 20° Down; Inside use, ±10° Up/Down … ask!
Use Bracket With Crossbar for "Snap On/Off" Mounts
#415 Bracket Mount
Body 6½"L x 1½"H x 1⅜"D
Primarily used in CAP/SHELL Rear Window applications
All Tough Lexan® (Polycarbonate) Construction
Uses Cooler #922 Bulbs
Outside, can tilt from Vertical to 20° Down; Inside use, ±10° Up/Down … ask!
Use Bracket With Crossbar for "Snap On/Off" Mounts